The instructions for Windows 10 are a bit different from Windows 7 & 8.
For Windows 7 & 8 users:
Right click the sound icon on desktop> Click Recording devices.
- If you see a USB Microphone, go down to the next step.
- If your USB microphone is disabled or you don't see it, right click within the empty space > Select Show Disabled Devices > Right click the disabled USB Microphone > Click Enable.
Is your USB microphone the Default Device?
- If it is, you should see a check markon the USB microphone's icon. Then go down to the next step.
- If it's not, right click the USB Microphone > Select Set as Default Device.
For Windows 10 users:
Right click the sound iconon desktop > Click Open Sound settings. Under Input, You should see your input device in the dropdown menu. Select your USB Microphone from the dropdown.
- For Windows 7 & 8 users, double click your USB Microphone.
- For Windows 10 users, click Device properties under Input.
Windows 7 & 8 Windows 10
- Drag Microphone slider to 100
- Drag Microphone Boost slider to 0.0 dB (if visible)
Important: make sure microphone is NOT muted.
Picture below shows the microphone is muted. Un-mute by clicking the icon .
Click Listen > Uncheck Listen to this device.
- Select 1 channel, 16 bit, 44100Hz (CD Quality) from the drop-down menu. If this selection is unavailable, keep the default format.
- Uncheck Enable audio enhancements (if visible)
Click OK. Your adjustment is complete!
Lastly, click the attachment below to listen to a 6-second audio and get a sense of what good quality recording sounds like. You are all set and ready to launch PitchVantage!
Sound recording settings different from what's shown in this article? We apologize for the inconvenience. Please contact us immediately and we will help you figure out the optimal setting!